If at any time you want to review your order so far, please click below

  THERMITE IGNITION COMPOSITION - HIGH EXOTHERM,  Stock # SECTIC - FS
Very easy to use and inexpensive. There isn't another composition like it on the market! Simply mix the A/B two component ignition comp and place approx ~10 grams in a square of aluminum foil, insert a length of Imitation Thermalite™, safety fuse or electric match, twist the foil 'bag' closed and press it into the thermite as shown below. One pound will make 45 8 gram pellets - each one will ignite raw thermite! Note: if using electric matches, we recommend our Boro/Zirconium 8000™ kit.   The two part A/B kits CAN be shipped by US Mail with no hazmat fees - No ATFE required to order.

$11.25/ lb                                                                  $53.75/ 5 lbs    (ship wt 6 lbs)                      Special (case of 25 - $237.00      (ship wt 29 lbs)

THERMITE COMPOSITION - COMMERCIAL - Stock #SECTHERM
High quality thermic composition specially blended to produce molten slag alloys and extreme heat in excess of 4500º F to weld metals together or cut through it like a cutting torch. The military used thermite to destroy equipment, documents and other incendiary uses as well as remote welding. Normally difficult to ignite, it can be easily ignited using our THERMITE IGNITION COMPOSITION listed above. Easily cuts through 1/8" sheet metal in seconds - heavier metals slightly longer depending on thickness. Virtually dozens of uses for camping and survival in any weather or climate. Comes with instructions.    Non-hazmat shipping- No ATFE required to order.

$7.95/lb                                                $36.00/5lb                                             Case of 25 1lb units - $149.95

THERMITE COMPOSITION - HEAVY DUTY INDUSTRIAL - Stock #SECTHERM/IND
High quality industrial thermic composition specially blended for industrial applicatioins to cut thick, heavy metals. This is the one used to weld railroad rails together. It too produces molten slag alloys (in larger volume) and extreme heat in excess of 4500º F to weld metals together or cut through it like a cutting torch. The military uses thermite to destroy equipment, documents and other incendiary uses as well as remote welding. Normally difficult to ignite, it can be easily ignited using our THERMITE IGNITION COMPOSITION listed above. Easily cuts through 1/4" steel in seconds - heavier metals slightly longer depending on thickness. Virtually dozens of uses for camping and survival in any weather or climate. Comes with instructions.   Non-Hazmat Shipping By US Mail - No ATFE required to order.

$8.95/lb                                   $41.00/5lb                                 $190.40/ 32lb ($5.95/lb)                      (ship wt 24 lbs)

  TITANIUM THERMITE COMPOSITION - WELDING ALLOY - [Al/Ti/Cr/V/Fe3O4/SiO2] - Stock #SECTHERM/Ti     NOT YET IN STOCK
High quality industrial thermic composition specially blended for industrial and emergency welding applicatioins and/or cutting thick, heavy metals. Infused with titanium, the molten alloy is stronger than Fe/Al or other metal/metal oxide thermites. It too produces molten slag alloys (in larger volume) and extreme heat in excess of 4500º F to weld metals together or cut through it like a cutting torch. Titanium thermite is the better choice for emergency welding operations. Normally difficult to ignite, it can be easily ignited using our THERMITE IGNITION COMPOSITION listed above.  Non-Hazmat Shipping By US Mail - No ATFE required to order.
NOT YET IN STOCK

Case of 25 1lb units -

Firefox Enterprises LLC
11612 N. Nelson
Pocatello, ID. 83202

 firefox-fx@hotmail.com
Order & Information Lines:
1 (208) 251-7415          1 (208) 909-8173